Ring Size Fitting Guide


ATOP Ring Fitting Guide

  • 1.Cut a strip of paper or a piece of string.The paper strip should be approximately 1/2’’ wide and 5’’ long.

  • 2.Wrap the paper or string around the finger to be sized, slide the paper or string up to the knuckle, as the ring must be sized large enough to able to slip off and on, over the knuckle.
  • 3.Use a pen to mark the paper or string where the long end overlaps.
  • 4.Measure the mark from the end of the length of paper or string with a ruler.Use the metric side for more accurate sizing.
  • 5.Locate the ring size by locating your measuring on the printed chart.If the measurement falls in between two size, it is recommended that you chose the large size.

If you have any problem,please contact us firstly.